Technical Design Documentation for the ILC Damping Ring (DR)

This is a collection of documents about the Damping Ring.

• Lattice
• CFS-Criteria
• Fast-Ion
• Electron-Cloud
• Kicker

General

• WBS Node:  D*0531817
• Parameter List: D*0960955 (Excel)
• Lattice DTC04 (23.2.2012): D*0960185
• Geometry files for CFS (24.2.2012): D*0976325
• Lattice visualization (JT file): e- ring: D*0961445, e+ ring: D*0961485, 2nd e+ ring for upgrade: D*0961515
• Treaty Point Definition: D*0966225, Central Region Layout: D*0969765
• CFS Design Criteria, final draft for TDR, 16.4.2012: D*0960625
• Damping Rings cryogenics power estimate (17.5.2012): D*1005075 (Excel)

• CAD model of wiggler section (N. Collomb, Daresbury): D*1073983
• CAD model of BPM (N. Collomb, Daresbury): D*1199623

More EDMS Documents

• T. Peterson: "Damping Rings RDR cryogenic system summary" D*831915

• 35, 38: A. Wolski, J. Gao and S. Guiducci, ``Configuration studies and recommendations for the ILC damping rings,'' LBNL-59449 | COCKCROFT-06-04 | ILC-NOTE-2009-051 (2006) | 
  Spires: R LBNL-59449 | D*0954255
• 43: R. Boni, G. Cavallari: ``Updated RF System for the ILC Damping Rings,''
  ILC-LNF Technical Note ILC-LNF-003 (2006) | D*0950535
  

• R. Boni, G. Cavallari: ``RF System for the ILC Damping Rings,'' ILC-LNF Technical Note ILC-LNF-001 (2006).
  EDMS: D*0954405
• A. Drago: ``Fast Feedback System,'' ILC-LNF Technical Note ILC-LNF-002 (2006).
  EDMS: D*0954285
• A. Gallo,``Optimal Fixed Detuning of the Damping Ring Cavities for the ILC 10 Hz Operation,'' ILC-NOTE-2011-060, ILC-LNF-004 (2011).
  ILCDOC 35050, EDMS D*0973035

Lattice

• DTC lattice:   D*0960185,
  • Electron Ring visualization: D*0961445
  • Positron Ring 1 visualization:  D*0961485
  • Positron Ring 2 (upgrade) visualization:  D*0961515
• DRCL_SB3 lattice: D*0959925
• DSB3_2 lattice: D*0959985

• List of lattice files on Cornell Wiki site

• 12: H. Ehrlichmann, ``Bunch timing aspects for the ILC,'' DESY-M-06-01 (2006).
  EDMS: D00000000951925

• Y. P. Sun, J. Gao, Z. Y. Guo and W. S. Wan, ``International Linear Collider damping ring lattice design based on modified FODO arc cells,''
  Phys. Rev. ST Accel. Beams 11 (2008) 061001.
  Spires: J PRSTA,11,061001 DOI: 10.1103/PhysRevSTAB.11.061001
• S. Guiducci and M. Biagini, ``A Low Emittance Lattice for the ILC 3 km Damping Ring,''
  IPAC-2010-WEPE086 (2010), In the Proceedings of 1st International Particle Accelerator Conference: IPAC'10, Kyoto, Japan, 23-28 May 2010, pp 3545-3547.
  Spires: J CONFP,C100523,WEPE086 | D*0957345
• I. Reichel, ``Injection and Extraction Lines for the ILC Damping Rings,''
  PAC07-THPMN115 (2007).
  In the Proceedings of Particle Accelerator Conference (PAC 07), Albuquerque, New Mexico, 25-29 Jun 2007, pp 2984-2986 (THPMN115).
  DOI: 10.1109/PAC.2007.4440642
• I. Reichel, ``Frequency Map Studies for the ILC Damping Rings,''
  PAC07-THPMN116 (2007).
  In the Proceedings of Particle Accelerator Conference (PAC 07), Albuquerque, New Mexico, 25-29 Jun 2007, pp 2987-2989(THPMN116).
• S. Guiducci and M. Biagini, ``A Low Emittance Lattice for the ILC 3 km Damping Ring,'' IPAC-2010-WEPE086 (2010),
  In the Proceedings of 1st International Particle Accelerator Conference: IPAC'10, Kyoto, Japan, 23-28 May 2010, pp 3545-3547 (WEPE086).
  EDMS: D*0957345
• D. Wang, J. Gao and Y. Wang, ``A New Design for ILC 3.2 km Damping Ring Based on FODO Cell,''
  IPAC-2010-WEPE088 (2010), In the Proceedings of 1st International Particle Accelerator Conference: IPAC'10, Kyoto, Japan, 23-28 May 2010, pp 3551-3553.
  Spires: J CONFP,C100523,WEPE088 | D*0957385
• M. Korostelev and A. Wolski, ``DCO4 Lattice Design For 6.4 km ILC Damping Rings,''
  IPAC-2010-WEPE096 (2010). In the Proceedings of 1st International Particle Accelerator Conference: IPAC'10, Kyoto, Japan, 23-28 May 2010, pp WEPE096.
  Spires: J CONFP,C100523,WEPE096
• M. Korostelevy, ``DCO4 lattice design for 6.4km ILC damping rings,''
  ILC-NOTE-2010-056 (2010).
• M. Korostelev and A. Wolski, ``DCO4 Lattice Design For 6.4 Km ILC Damping Rings,''
  IPAC-2010-WEPE096 (2010).
  In the Proceedings of 1st International Particle Accelerator Conference: IPAC'10, Kyoto, Japan, 23-28 May 2010, pp WEPE096.
• K. Panagiotidis, A. Wolski, M. Korostelev and K. Panagiotidis, ``Low-emittance tuning simulations for the ILC Damping Rings,'' IPAC-2010-THPE038 (2010),
  In the Proceedings of 1st International Particle Accelerator Conference: IPAC'10, Kyoto, Japan, 23-28 May 2010, pp THPE038.
  OSTI 982081
• M. T. F. Pivi et al., ``Recommendation for the Feasibility of more Compact LC Damping Rings,''
  SLAC-PUB-14122, IPAC-2010-WEPE097 (2010).
  In the Proceedings of 1st International Particle Accelerator Conference: IPAC'10, Kyoto, Japan, 23-28 May 2010, pp. 3578-3580 (WEPE097).
• A. Wolski, ``ILC Damping Ring Design Studies at the Cockcroft Institute,'' Cockcroft-10-27, ILC-NOTE-2010-057 (2010).
  EDMS: D*0931755

Magnet References

•  Y. Cai, "Measured Multipole Errors in PEP-II and SPEAR3 Magnets,"
  talk given at SLAC, June 14, 2005 (DR Wiki) EDMS ID: D00000000997795

Timing References

• W. Kriens, ``Basic timing requirements for TESLA,'' TESLA-2001-10 (2001).
  EDMS: D00000000954225
• H. Ehrlichmann, ``Bunch timing aspects for the ILC,'' DESY-M-06-01 (2006).
  EDMS: D00000000951925
• H. Ehrlichmann et al., ``Recommendations for ILC configuration satisfying timing constraints,'' unpublished report (2006).
  EDMS ID: D*0829945
• G. Penn, ``Timing issues for the ILC damping rings,'' unpublished report (2007).
  EDMS ID: D*0951965
• B. List, "Harmonic number for the ILC damping rings," unpublished report (2011).
  EDMS ID: D*0960865

Damping Ring CFS Criteria

• CFS Design Criteria, final draft for TDR 13.6.2012: D*0960625

Fast Ion

• 36: G. V. Stupakov, T. O. Raubenheimer and F. Zimmermann, ``Fast beam ion instability. 2. Effect of ion decoherence,'' Phys. Rev. E 52 (1995) 5499-5504.
  Spires: J PHRVA,E52,5499  DOI: 10.1103/PhysRevE.52.5499

Electron Cloud

• 39: K. Ohmi, F. Zimmermann and E. Perevedentsev, ``Wake-field and fast head - tail instability caused by an electron cloud,'' Phys. Rev. E 65 (2002) 016502.
  Spires: J PHRVA,E65,016502  DOI: 10.1103/PhysRevE.65.016502
• 40: L. Wang, T. O. Raubenheimer and G. Stupakov, ``Suppression of secondary emission in a magnetic field using triangular and rectangular surfaces,'' Nucl. Instrum. Meth. A 571 (2007) 588-598.
  Spires: J NUIMA,A571,588  DOI: 10.1016/j.nima.2006.11.039
• 41: L. Wang et al.,``A perfect electrode to suppress secondary electrons inside the magnets,'' SLAC-PUB-11962 (2006), In the Proceedings of 10th European Particle Accelerator Conference (EPAC 06), Edinburgh, Scotland, 26-30 Jun 2006, pp 1489-149 (TUPLS003).
  Spires: J CONFP,C060626,1489  |  D*0950485
• 42: D. Rice et al., ``Production and Testing Considerations for CESR-c Wiggler Magnets,''
  CBN-03-06, PAC03-TOAB007 (2003), In the Proceedings of Particle Accelerator Conference (PAC 03), Portland, Oregon, 12-16 May 2003, pp 167.
  Spires: J CONFP,C030512,167 DOI: 10.1109/PAC.2003.1288869
• 46: F. Le Pimpec, R. E. Kirby, F. King and M. Pivi, ``TiN and TiZrV thin film as a remedy against electron cloud,'' Nucl. Instrum. Meth. A 551 (2005) 187-199.
  Spires: J NUIMA,A551,187 DOI: 10.1016/j.nima.2005.05.048
• 48: M. Pivi et al.,``Simulations of the electron cloud build up and instabilities for various ILC damping ring configurations,'' SLAC-PUB-12237 (2007).
  Spires: R SLAC-PUB-12237 D*0954315
  

• M. T. F. Pivi, F. K. King, R. E. Kirby, T. O. Raubenheimer, G. Stupakov and F. Le Pimpec, ``Sharp Reduction of the Secondary Electron Emission Yield from Grooved Surfaces,'' J. Appl. Phys. 104 (2008) 104904.
  DOI: 10.1063/1.3021149
• Y. Suetsugu et al., ``Demonstration of electron clearing effect by means of a clearing electrode in high-intensity positron ring,'' Nucl. Instrum. Meth. A 598 (2009) 372.
  DOI: 10.1016/j.nima.2008.08.154  
• Y. Suetsugu, H. Fukuma, M. Pivi and L. Wang, ``Continuing study on electron-cloud clearing techniques in high-intensity positron ring: Mitigation by using groove surface in vertical magnetic field,'' Nucl. Instrum. Meth. A 604 (2009) 449.
  DOI: 10.1016/j.nima.2009.03.011
• Y. Suetsugu, H. Fukuma, K. Shibata, M. Pivi and L. Wang, ``Experimental Studies on Grooved Surfaces to Suppress Secondary Electron Emission,'' SLAC-PUB-14124, IPAC-2010-TUPD043 (2010)
  In the Proceedings of 1st International Particle Accelerator Conference: IPAC'10, Kyoto, Japan, 23-28 May 2010, pp TUPD043.
• M. T. F. Pivi et al., ``Experimental observations of in situ secondary electron yield reduction in the PEP-II particle accelerator beam line,'' Nucl. Instrum. Meth. A 621 (2010) 47.
  DOI: 10.1016/j.nima.2010.04.059
• M. Palmer et al., ``Electron cloud at low emittance in CESRTA,'' IPAC-2010-TUYMH02 (2010), May 2010.
  In the Proceedings of 1st International Particle Accelerator Conference: IPAC'10, Kyoto, Japan, 23-28 May 2010, pp TUYMH02.

Kicker

• 47: T. Naito et al., ``Development of the Strip line Kicker System for ILC Damping Ring,'' KEK-PREPRINT-2007-20 (2007).
  In the Proceedings of Particle Accelerator Conference (PAC 07), Albuquerque, New Mexico, 25-29 Jun 2007, pp 2772 (THPMN028).
  DOI: 10.1109/PAC.2007.4440571
  

•  T. Naito, H. Hayno, M. Kuriki, N. Terumura and J. Urakawa, ``Development of a 3ns rise and fall time strip-line kicker for the international linear collider,'' Nucl. Instrum. Meth. A 571 (2007) 599.
  DOI: 10.1016/j.nima.2006.11.062
• D. Alesini, S. Guiducci, F. Marcellini and P. Raimondi, ``Design, test, and operation of new tapered stripline injection kickers for the e+e- collider DAΦNE,'' Phys. Rev. ST Accel. Beams 13 (2010) 111002.
  DOI: 10.1103/PhysRevSTAB.13.111002