Instrumentation

In preparation

Beam Position Monitors

• 152: S. Walston et al., "Performance of a High Resolution Cavity Beam Position Monitor System,"
  Nucl. Instrum. Meth. A 578 (2007) 1.
  DOI: 10.1016/j.nima.2007.04.162
• 154: Z. Li, R. Johnson, S. R. Smith, T. Naito and J. Rifkin, "Cavity BPM with dipole-mode-selective coupler,"
  SLAC-PUB-11913 (2006). Contributed to Proceedings of the Particle Accelerator Conference (PAC 03), Portland, Oregon, 12-16 May 2003 (ROAB004).
  OSTI: 884883
• 155: M. Wendt, "Cold Cavity BPM R&D for the ILC,"
  Presented at 4th CARE-N3-HHH-ABI workshop on Novel Methods for Accelerator Beam Instrumentation, Lüneburg, Germany, Nov. 30-Dec. 1, 2006.
  http://adweb.desy.de/mdi/CARE/Lueneburg/CircuitSimulation_A4.pdf

• M. Juillard, C. Magne, A. Mosnier and B. Phung,  "High resolution BPM for the next linear colliders,"
  AIP Conf. Proc. 546 (2000) 259-266. Prepared for 9th Beam Instrumentation Workshop (BIW 2000), Cambridge, Massachusetts, 8-11 May 2000.
  DOI: 10.1063/1.1342594
• S. Y. Ryu, J. K. Ahn and H. Hayano, "Beam test of the ILC main-linac beam position monitor at KEK-ATF,"
  ATF-08-16 (2008).
• M. Slater et al., "Cavity BPM system tests for the ILC energy spectrometer,"
  Nucl. Instrum. Meth. A 592 (2008) 201-217.
  DOI: 10.1016/j.nima.2008.04.033
• Y. Inoue et al., "Development of a high-resolution cavity-beam position monitor,"
  Phys. Rev. ST Accel. Beams 11 (2008) 062801.
  DOI: 10.1103/PhysRevSTAB.11.062801
• D. Lipka, "Cavity BPM Designs, Related Electronics and Measured Performances,"
  Proceedings of the 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators DIPAC09, May 25-27, Basel, Switzerland, pp. 280-284 (TUOC02) (2009). 
• Si-Won Jang et al., "Test result on beam position resolution for low-Q IP-BPM at KEK-ATF2,"
  Contributed to 2nd International Particle Accelerator Conference: IPAC 2011, San Sebastian, Spain, 4-9 Sep 2011, pp. 1293-1295 (TUPC118).
• M. Wendt, "Overview Of Recent Trends And Developments For BPM Systems,"
  FERMILAB-CONF-11-377-AD (2011). Invited talk presented at 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators DIPAC 2011, Hamburg, Germany, 16-18 May 2011, pp. 18-22 (MOOC01). 
• Y. I. Kim et al., "A Comprehensive Study Of Nanometer Resolution Of The IPBPM At ATF2,"
  SLAC-PUB-14565 (2011), Contributed to 2nd International Particle Accelerator Conference: IPAC 2011, San Sebastian, Spain, 4-9 Sep 2011, pp. 1296-1298 (TUPC119).
• A. Heo, E.-S. Kim and H. Hayano,
  "Status of Cold Cavity Beam Position Monitor for STF,"
  Contributed to 2nd International Particle Accelerator Conference: IPAC 2011, San Sebastian, Spain, 4-9 Sep 2011, pp. 1236-1238 (TUPC097).
• Y. I. Kim et al., "Cavity beam position monitor system for the Accelerator Test Facility 2,"
  Phys. Rev. ST Accel. Beams 15 (2012) 042801.
  DOI: 10.1103/PhysRevSTAB.15.042801

Deflecting Mode Cavity (DMC), LOLA structures

• 159: O. H. Altenmueller, R. R. Larsen and G. A. Loew, "Investigations Of Traveling Wave Separators For The Stanford 2-Mile Linear Accelerator,"
  Rev. Sci. Instrum. 35 (1964) 438-442.
  DOI: 10.1063/1.1718840

Laser Wires

• 156: M. Price et al., "Beam profile measurements with the 2-D laser-wire,"
  EUROTEV-REPORT-2006-046, JAI-2006-007, EUROTEV-REPORT-2006-012, (2006). In the Proceedings of 10th European Particle Accelerator Conference (EPAC 06), Edinburgh, Scotland, 26-30 Jun 2006, pp 1121-1123 (TUPCH050).
• 157: S. T. Boogert et al., "A laser-wire system at the ATF extraction line,"
  SLAC-PUB-12328, EUROTEV-REPORT-2006-054, JAI-2006-004, (2006). In the Proceedings of 10th European Particle Accelerator Conference (EPAC 06), Edinburgh, Scotland, 26-30 Jun 2006, pp 738-740 (MOPLS080).
• 158: Y. Honda et al., "Upgraded Laser Wire Beam Profile Monitor,"
  Nucl. Instrum. Meth. A 538 (2005) 100-115.
  DOI: 10.1016/j.nima.2004.08.122

• T. Shintake, "Proposal of Nanometer beam size monitor for e+ e- linear colliders,"
  Nucl. Instrum. Meth. A 311 (1992) 453. 
  DOI: 10.1016/0168-9002(92)90641-G
• Y. Sakamura et al., "Development of laser wire beam profile monitor for measurement of low emittance beam,"
  Prepared for 11th Symposium on Accelerator Technology and Science, Hyogo, Japan, 21-23 Oct 1997
• P. Tenenbaum and T. Shintake, "Measurement of small electron-beam spots,"
  Ann. Rev. Nucl. Part. Sci. 49 (1999) 125-162.
  DOI: 10.1146/annurev.nucl.49.1.125
• Y. Sakamura et al., "Development of a laser wire beam profile monitor. I,"
  arXiv:hep-ex/9907054.
• H. Sakai et al., "Development of a laser wire beam profile monitor. II,"
  Nucl. Instrum. Meth. A 455 (2000) 113.
  DOI: 10.1016/S0168-9002(00)00716-6
• G. A. Blair et al., "Proposing a laser based beam size monitor for the future linear collider,"
  SLAC-PUB-9091, DESY-M-01-06J (2001). In the Proceedings of IEEE Particle Accelerator Conference (PAC 2001), Chicago, Illinois, 18-22 Jun 2001, pp 1339-1341 (TPAH051).
  DOI: 10.1109/PAC.2001.986673 
• H. Sakai et al., "Measurement of an electron beam size with a laser wire beam profile monitor,"
  Phys. Rev. ST Accel. Beams 4 (2001) 022801.
  DOI: 10.1103/PhysRevSTAB.4.022801
• H. Sakai et al., "Measurement of a small vertical emittance with a laser wire beam profile monitor,"
  Phys. Rev. ST Accel. Beams 5 (2002) 122801.
  DOI: 10.1103/PhysRevSTAB.5.122801
• I. Agapov, G. A. Blair and M. Woodley, "Beam emittance measurement with laser wire scanners in the International Linear Collider beam delivery system,"
  Phys. Rev. ST Accel. Beams 10 (2007) 112801 [Erratum-ibid. 11 (2008) 019902].
  DOI: 10.1103/PhysRevSTAB.10.112801, prstab-11-019902.pdf [Erratum] 
• N. Muchnoi, H. J. Schreiber and M. Viti, "ILC Beam Energy Measurement by means of Laser Compton Backscattering,"
  Nucl. Instrum. Meth. A 607 (2009) 340 [arXiv:0812.0925 [physics.ins-det]].
  DOI: 10.1016/j.nima.2009.05.145
• S. T. Boogert et al., "Micron-scale laser-wire scanner for the KEK Accelerator Test Facility extraction line,"
  Phys. Rev. ST Accel. Beams 13 (2010) 122801.
  DOI: 10.1103/PhysRevSTAB.13.122801

Polarimetry and Spin Tracking

• 82:  K. Moffeit et al., "Polarization Setup and Polarimetry for 2 IRs, and Status of Downstream Polarimeter Designs,"
  SLAC-PUB-11322, LCWS-2005-1111 (2005).
  In the Proceedings of 2005 International Linear Collider Workshop (LCWS 2005), Stanford, California, 18-22 Mar 2005, pp 1111.
  OSTI: 881140
• 83: N. Meyners, V. Gharibyan and K. P. Schuler, "Upstream Polarimetry with 4-Magnet Chicane,"
  LCWS-2005-1112 (2005).
  In the Proceedings of 2005 International Linear Collider Workshop (LCWS 2005), Stanford, California, 18-22 Mar 2005, pp 1112.
• 112: G. A. Moortgat-Pick et al., "Spin tracking at the ILC,"
  EUROTEV-REPORT-2006-037 (2006).
  In the Proceedings of 10th European Particle Accelerator Conference (EPAC 06), Edinburgh, Scotland, 26-30 Jun 2006, pp 2454-2456 (WEPLS032).

• Ken Moffeit and Mike Woods, "Laser System for a Compton Polarimeter,"
  IPBI TN-2003-2 (2003).
• K. Moffeit, T. Maruyama, Y. Nosochkov, A. Seryi, M. Woodley and M. Woods, "Proposal to modify the polarimeter chicane in the ILC 14-mrad extraction line,"
  SLAC-PUB-12425, IPBI-TN-2007-1 (2007).
  DOI: 10.2172/901838 OSTI: 901838
• S. Boogert et al., "Polarimeters and Energy Spectrometers for the ILC Beam Delivery System,"
  JINST 4 (2009) P10015 [arXiv:0904.0122 [physics.ins-det]].
  DOI: 10.1088/1748-0221/4/10/P10015
• A Lyapin et al., "Results from a prototype chicane-based energy spectrometer for a Linear Collider ,"
  JINST 6 (2011) P02002.
  DOI: 10.1088/1748-0221/6/02/P02002

Luminosity Measurement

• 104: O. Napoly and D. Schulte, "Luminosity monitor options for TESLA,"
  CERN-OPEN-2000-135 (2000). Contributed to 19th International Linear Accelerator Conference (Linac 98), Chicago, Illinois, 23-28 Aug 1998 (MO4016).

Further References

Energy Measurement

• V. N. Duginov et al., "The beam energy spectrometer at the International Linear Collider,"
  LC-DET-2004-031 (2004). 

Feedback System

• 52:  P. N. Burrows et al.,  "Tests of the FONT3 linear collider intra-train beam feedback system at the ATF,"
  SLAC-PUB-11760 (2005).
  In the Proceedings of Particle Accelerator Conference (PAC 05), Knoxville, Tennessee, 16-20 May 2005, pp 1359 (RPPP013).
  DOI: 10.1109/PAC.2005.1590761 EDMS ID: D00000000954375
• 79: G. Christian et al., "The electromagnetic background environment for the interaction-point beam feedback system at the International Linear Collider,"
  SLAC-PUB-12624, EUROTEV-REPORT-2006-072 92006).
  In the Proceedings of 10th European Particle Accelerator Conference (EPAC 06), Edinburgh, Scotland, 26-30 Jun 2006, pp 2997-2999 (THPCH089).
  OSTI: 909768
• 80: P. Burrows et al., "Performance of the FONT3 fast analogue intra-train beam-based feedback system at ATF,"
  SLAC-PUB-12471, EUROTEV-REPORT-2006-063 (2006).
  In the Proceedings of 10th European Particle Accelerator Conference (EPAC 06), Edinburgh, Scotland, 26-30 Jun 2006, pp 852-854 (MOPLS123).
  OSTI: 902488
• 81: P. Burrows et al., "Design of the ILC prototype FONT4 digital intra-train beam-based feedback system,"
  SLAC-PUB-12470, EUROTEV-REPORT-2006-062 (2006).
  In the Proceedings of 10th European Particle Accelerator Conference (EPAC 06), Edinburgh, Scotland, 26-30 Jun 2006, pp 849-851 (MOPLS122).
  OSTI: 902487
• 109: G. R. White, G. R. White, D. Schulte and N. J. Walker,  "Design and simulation of the ILC intra-train orbit and luminosity feedback systems,"
  EUROTEV-REPORT-2006-088 (2006).
  In the Proceedings of 10th European Particle Accelerator Conference (EPAC 06), Edinburgh, Scotland, 26-30 Jun 2006, pp 3041-3043 (THPC104).

Survey System

• 113: A. Reichold et al., "The LiCAS-RTRS: A survey system for the ILC,"
  EUROTEV-REPORT-2006-075, JAI-2006-011 (2006).
  In the Proceedings of 10th European Particle Accelerator Conference (EPAC 06), Edinburgh, Scotland, 26-30 Jun 2006, pp 520-522 (MOPCH195).

 Machine Protection System

• 115: Tom Mattison, "Thoughts on fast beam aborts for ILC,"
  Talk presented at NanoBeam 2005 (36th ICFA Advanced Beam Dynamics Workshop), Kyoto, Japan, Oct. 17-21, 2005. 
• 116: M. C. Ross et al., "Single pulse damage in copper,"
  SLAC-PUB-8605 (2000).
  in Proc. of the 20th Intl. Linac Conference LINAC 2000 ed. Alexander W. Chao, In the Proceedings of 20th International Linear Accelerator Conference (LINAC00), Monterey, California, 21-25 Aug 2000, (MOA06).
• 117: M. Ross, "Some MPS design rules and references,"
  Web site (2007), http://www-project.slac.stanford.edu/ilc/MPS_design_rules.htm.
• 118: P. Tenenebaum, "The ILC Machine Protection Issue,"
  Talk presented at 2005 International Linear Collider Physics and Detector Workshop and Second ILC Accelerator Workshop (ALCPG05)m Aug. 14-27, 2005, Snowmann, CO (ILCAW1006).